msgid ""
msgstr ""
"Project-Id-Version: DriverInstall_en_US\n"
"POT-Creation-Date: 2016-11-03 10:33+0800\n"
"PO-Revision-Date: 2016-11-03 10:37+0800\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en_US\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.7.5\n"
"X-Poedit-Basepath: H:\\RTLabelPrinterTool\\Solution\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-KeywordsList: getPoTextW;showErrMsg;showSuccessMsg;checkPortType\n"
"X-Poedit-SearchPath-0: MainDlg.h\n"
"X-Poedit-SearchPath-1: MainDlg.cpp\n"
"X-Poedit-SearchPath-2: ParamSetDialog.h\n"
"X-Poedit-SearchPath-3: ParamSetDialog.cpp\n"
"X-Poedit-SearchPath-4: SendUDP.cpp\n"
"X-Poedit-SearchPath-5: SendTcp.cpp\n"
"X-Poedit-SearchPath-6: 2DBARTabDialog.h\n"
"X-Poedit-SearchPath-7: 2DBARTabDialog.cpp\n"
"X-Poedit-SearchPath-8: BaseTabDialog.h\n"
"X-Poedit-SearchPath-9: BaseTabDialog.cpp\n"
"X-Poedit-SearchPath-10: Big5TabDialog.h\n"
"X-Poedit-SearchPath-11: Big5TabDialog.cpp\n"
"X-Poedit-SearchPath-12: BlackMarkTabDialog.h\n"
"X-Poedit-SearchPath-13: BlackMarkTabDialog.cpp\n"
"X-Poedit-SearchPath-14: cmd.h\n"
"X-Poedit-SearchPath-15: cmd.cpp\n"
"X-Poedit-SearchPath-16: Config.h\n"
"X-Poedit-SearchPath-17: Config.cpp\n"
"X-Poedit-SearchPath-18: DownloadDialog.h\n"
"X-Poedit-SearchPath-19: DownloadDialog.cpp\n"
"X-Poedit-SearchPath-20: EthernetDialog.h\n"
"X-Poedit-SearchPath-21: EthernetDialog.cpp\n"
"X-Poedit-SearchPath-22: HotTabDialog.h\n"
"X-Poedit-SearchPath-23: HotTabDialog.cpp\n"
"X-Poedit-SearchPath-24: LogoTabDialog.h\n"
"X-Poedit-SearchPath-25: LogoTabDialog.cpp\n"
"X-Poedit-SearchPath-26: Monitor.h\n"
"X-Poedit-SearchPath-27: Monitor.cpp\n"
"X-Poedit-SearchPath-28: NetTabDialog.h\n"
"X-Poedit-SearchPath-29: NetTabDialog.cpp\n"
"X-Poedit-SearchPath-30: PrinterSetDialog.h\n"
"X-Poedit-SearchPath-31: PrinterSetDialog.cpp\n"
"X-Poedit-SearchPath-32: ProgramTabDialog.h\n"
"X-Poedit-SearchPath-33: ProgramTabDialog.cpp\n"
"X-Poedit-SearchPath-34: RppTabDialog.h\n"
"X-Poedit-SearchPath-35: RppTabDialog.cpp\n"
"X-Poedit-SearchPath-36: SerialTabDialog.h\n"
"X-Poedit-SearchPath-37: SerialTabDialog.cpp\n"
"X-Poedit-SearchPath-38: UDPSearchTabDialog.h\n"
"X-Poedit-SearchPath-39: UDPSearchTabDialog.cpp\n"
"X-Poedit-SearchPath-40: util.h\n"
"X-Poedit-SearchPath-41: util.cpp\n"
"X-Poedit-SearchPath-42: WifiTabDialog.h\n"
"X-Poedit-SearchPath-43: WifiTabDialog.cpp\n"
"X-Poedit-SearchPath-44: GlobalString.h\n"
"X-Poedit-SearchPath-45: LptDialog.cpp\n"
"X-Poedit-SearchPath-46: ParamSetDialog.h\n"
"X-Poedit-SearchPath-47: OtherTabDialog.h\n"
"X-Poedit-SearchPath-48: OtherTabDialog.cpp\n"
"X-Poedit-SearchPath-49: LabelSettingDialog.h\n"
"X-Poedit-SearchPath-50: LabelSettingDialog.cpp\n"
"X-Poedit-SearchPath-51: ComDevice.h\n"
"X-Poedit-SearchPath-52: Device.h\n"
"X-Poedit-SearchPath-53: DeviceFactory.h\n"
"X-Poedit-SearchPath-54: ENetDevice.h\n"
"X-Poedit-SearchPath-55: LPTDevice.h\n"
"X-Poedit-SearchPath-56: PrinterDevice.h\n"
"X-Poedit-SearchPath-57: USBDevice.h\n"
"X-Poedit-SearchPath-58: ComDevice.cpp\n"
"X-Poedit-SearchPath-59: ENetDevice.cpp\n"
"X-Poedit-SearchPath-60: LPTDevice.cpp\n"
"X-Poedit-SearchPath-61: PrinterDevice.cpp\n"
"X-Poedit-SearchPath-62: USBDevice.cpp\n"
"X-Poedit-SearchPath-63: LabelSettingDialog.h\n"
"X-Poedit-SearchPath-64: LabelSettingTool.h\n"
"X-Poedit-SearchPath-65: LocationTabDialog.h\n"
"X-Poedit-SearchPath-66: PrintSettingTabDialog.h\n"
"X-Poedit-SearchPath-67: TestTabDialog.h\n"
"X-Poedit-SearchPath-68: LabelSettingDialog.cpp\n"
"X-Poedit-SearchPath-69: LabelSettingTool.cpp\n"
"X-Poedit-SearchPath-70: LocationTabDialog.cpp\n"
"X-Poedit-SearchPath-71: PrintSettingTabDialog.cpp\n"
"X-Poedit-SearchPath-72: TestTabDialog.cpp\n"
"X-Poedit-SearchPath-73: UserDefTabDialog.h\n"
"X-Poedit-SearchPath-74: UserDefTabDialog.cpp\n"
"X-Poedit-SearchPath-75: ShowPrinterInfoDlg.cpp\n"
"X-Poedit-SearchPath-76: ShowPrinterInfoDlg.h\n"
"X-Poedit-SearchPath-77: TextTestDialog.cpp\n"
"X-Poedit-SearchPath-78: TextTestDialog.h\n"
"X-Poedit-SearchPath-79: CodePageDialog.h\n"
"X-Poedit-SearchPath-80: CodePageDialog.cpp\n"
"X-Poedit-SearchPath-81: BlueToothDialog.h\n"
"X-Poedit-SearchPath-82: BlueToothDialog.cpp\n"

#: BlueToothDialog.cpp:72
msgid "PO_GSTR_RPP_DEV_NAME_EMPTY_ERR"
msgstr "Please input device name"

#: BlueToothDialog.cpp:77
msgid "PO_GSTR_RPP_DEV_NAME_LEN_ERR"
msgstr "Please input a device name(1~33 characters)"

#: BlueToothDialog.cpp:88
msgid "PO_GSTR_RPP_PIN_EMPTY_ERR"
msgstr "Please input pin"

#: BlueToothDialog.cpp:95 BlueToothDialog.cpp:103
msgid "PO_GSTR_RPP_PIN_LEN_ERR"
msgstr "Please a input pin(Android 4 characters, ios 6 characters)"

#: BlueToothDialog.cpp:112
msgid "PO_GSTR_RPP_PIN_FORMAT_ERR"
msgstr "PIN only allows for the digital"

#: BlueToothDialog.cpp:139 BlueToothDialog.cpp:145 CodePageDialog.cpp:37
#: CodePageDialog.cpp:43 NetTabDialog.cpp:109 NetTabDialog.cpp:115
#: NetTabDialog.cpp:137 NetTabDialog.cpp:143 NetTabDialog.cpp:204
#: NetTabDialog.cpp:210 NetTabDialog.cpp:239 NetTabDialog.cpp:245
#: PrintSettingTabDialog.cpp:177 PrintSettingTabDialog.cpp:183
#: SerialTabDialog.cpp:57 SerialTabDialog.cpp:63 TestTabDialog.cpp:69
#: TestTabDialog.cpp:75 UserDefTabDialog.cpp:25 UserDefTabDialog.cpp:31
#: WifiTabDialog.cpp:135 WifiTabDialog.cpp:141
msgid "PO_GSTR_SETTING_FAIL"
msgstr "Setting Fail"

#: BlueToothDialog.cpp:149 CodePageDialog.cpp:47 NetTabDialog.cpp:119
#: NetTabDialog.cpp:147 NetTabDialog.cpp:214 NetTabDialog.cpp:249
#: PrintSettingTabDialog.cpp:187 SerialTabDialog.cpp:67 TestTabDialog.cpp:79
#: UserDefTabDialog.cpp:35 WifiTabDialog.cpp:145
msgid "PO_GSTR_SETTING_SUCCESS"
msgstr "Setting Success"

#: ComDevice.cpp:20 MainDlg.cpp:55
msgid "PO_GSTR_SET_COM_NEED_CONFIG"
msgstr "You need Configure com port first"

#: ComDevice.cpp:27 Config.cpp:156 Config.cpp:166
msgid "PO_GSTR_SET_COM_FAIL"
msgstr "Configure com port fail"

#: ComDevice.cpp:35 ENetDevice.cpp:17 LPTDevice.cpp:16 PrinterDevice.cpp:67
#: USBDevice.cpp:29
msgid "PO_GSTR_SET_SUCCESS"
msgstr "Set success"

#: ComDevice.cpp:41 ENetDevice.cpp:22 LPTDevice.cpp:22
msgid "PO_GSTR_SET_FAIL"
msgstr "Set fail"

#: ComDevice.cpp:114 Config.cpp:144
msgid "PO_GSTR_OPEN_COM_FAIL"
msgstr "Open com fail"

#: Config.cpp:28 LptDialog.cpp:171
msgid "PO_GSTR_CONFIG_PORT_ERROR"
msgstr "Can't config port"

#: LPTDevice.cpp:93
msgid "PO_GSTR_OPEN_LPT_FAIL"
msgstr "Open lpt fail"

#: LabelSettingDialog.cpp:48 LabelSettingDialog.cpp:55
msgid "PO_GSTR_INPUT_VALID_SERIAL_NUMBER"
msgstr "Please input valid serial number(MAX 25 Character)."

#: LabelSettingTool.cpp:134 LabelSettingTool.cpp:224 LabelSettingTool.cpp:497
msgid "PO_GSTR_PRINTER_IS_NOT_READY"
msgstr "Operation failed,Printer is not ready"

#: LabelSettingTool.cpp:332
msgid "PO_GSTR_CONNECT_SUCCESS"
msgstr "Connection Successful"

#: LabelSettingTool.cpp:337
msgid "PO_GSTR_CONNECT_FAILED"
msgstr "Connection Fail"

#: LocationTabDialog.cpp:23 LocationTabDialog.cpp:29 LocationTabDialog.cpp:46
#: LocationTabDialog.cpp:52
msgid "PO_GSTR_OPERATION_FAIL"
msgstr "Operation Failure"

#: LocationTabDialog.cpp:33 LocationTabDialog.cpp:56
msgid "PO_GSTR_OPERATION_SUCCESS"
msgstr "Operation Success"

#: LptDialog.cpp:119
msgid "PO_GSTR_CONFIG_LPT"
msgstr "Configure LPT Port"

#: LptDialog.cpp:121
msgid "PO_GSTR_TIMEOUT"
msgstr "Timeout(seconds)"

#: LptDialog.cpp:123
msgid "PO_GSTR_RETRY"
msgstr "Transmission Retry"

#: LptDialog.cpp:125
msgid "PO_GSTR_LPT_OK"
msgstr "OK"

#: LptDialog.cpp:126
msgid "PO_GSTR_LPT_CANCEL"
msgstr "CANCEL"

#: MainDlg.cpp:61
msgid "PO_GSTR_SET_ENET_NEED_CONFIG"
msgstr "You need Configure ip first"

#: MainDlg.cpp:76
msgid "PO_GSTR_CAN_NOT_GET_PRINTER_SETTING_INFO"
msgstr "Can not get the printed information from this port"

#: MainDlg.cpp:123
msgid "PO_GSTR_CANNOT_CONFIG_PORT"
msgstr "The port no configuration"

#: MainDlg.cpp:180
msgid "PO_GSTR_NONSUPPORT_OPERATION"
msgstr "The port nonsupport this opreation"

#: MainDlg.cpp:192
msgid "PO_GSTR_CAN_NOT_GET_PRINTER_INFO"
msgstr "Can not get printer's information from this port"

#: NetTabDialog.cpp:60
msgid "PO_GSTR_INVALID_IP_FIRST_PART"
msgstr " is not a valid entry. Please specify a value between 1 and 223."

#: NetTabDialog.cpp:67
msgid "PO_GSTR_INVALID_IP_FIRST_PART_127"
msgstr ""
"IP addresses starting with 127 are not valid because they are reserved for "
"loopback addresses. Please specify some other valid value between 1 and 223."

#: PrintSettingTabDialog.cpp:27 PrintSettingTabDialog.cpp:35
#: PrintSettingTabDialog.cpp:42 PrintSettingTabDialog.cpp:53
#: PrintSettingTabDialog.cpp:61 PrintSettingTabDialog.cpp:68
#: PrintSettingTabDialog.cpp:78 PrintSettingTabDialog.cpp:86
#: PrintSettingTabDialog.cpp:94 PrintSettingTabDialog.cpp:103
#: PrintSettingTabDialog.cpp:111 PrintSettingTabDialog.cpp:119
#: PrintSettingTabDialog.cpp:128 PrintSettingTabDialog.cpp:136
#: PrintSettingTabDialog.cpp:144 TextTestDialog.cpp:37 TextTestDialog.cpp:45
#: TextTestDialog.cpp:57 TextTestDialog.cpp:65
msgid "PO_GSTR_PLEASE_INPUT_NUMBER"
msgstr "Please input a valid number"

#: PrinterDevice.cpp:28
msgid "PO_GSTR_START_DOC_FAIL"
msgstr "Start doc fail"

#: PrinterDevice.cpp:35
msgid "PO_GSTR_START_PAGE_FAIL"
msgstr "Start page fail"

#: PrinterDevice.cpp:43
msgid "PO_GSTR_WRITE_PRINTER_FAIL"
msgstr "Write printer fail"

#: PrinterDevice.cpp:50
msgid "PO_GSTR_END_PAGE_FAIL"
msgstr "End page fail"

#: PrinterDevice.cpp:56
msgid "PO_GSTR_END_DOC_FAIL"
msgstr "End doc fail"

#: PrinterDevice.cpp:63
msgid "PO_GSTR_WRITE_PRINTER_LESS"
msgstr "Raw data send to printer is less than request"

#: PrinterDevice.cpp:107
msgid "PO_GSTR_OPEN_PRINTER_FAIL"
msgstr "Open printer fail"

#: ProgramTabDialog.cpp:38 ProgramTabDialog.cpp:46 ProgramTabDialog.cpp:132
msgid "PO_GSTR_INVALID_FIRMWARE"
msgstr "Invalid Firmware"

#: ProgramTabDialog.cpp:183 ProgramTabDialog.cpp:189
msgid "PO_GSTR_UPDATE_FIRMWARE_FAIL"
msgstr "Update Firmware fail"

#: ProgramTabDialog.cpp:193
msgid "PO_GSTR_UPDATE_FIRMWARE_SUCCESS"
msgstr "Update Firmware success"

#: TestTabDialog.cpp:34
msgid "PO_GSTR_CAN_NOT_CHECK_BAD_POINT"
msgstr "The port nonsupport checking bad point"

#: TestTabDialog.cpp:50 TestTabDialog.h:45
msgid "PO_IDC_STATIC_BAD_POINT_CHECK_RESULT_NORMAL"
msgstr "Normal"

#: TestTabDialog.cpp:54
msgid "PO_IDC_STATIC_FIND_BAD_POINT"
msgstr "Number Of Bad Point"

#: UDPSearchTabDialog.cpp:57 UDPSearchTabDialog.cpp:76
#: UDPSearchTabDialog.cpp:89 UDPSearchTabDialog.cpp:119
msgid "PO_GSTR_PARAM_SET_SELECT_PRINTER"
msgstr "Please select a existent printer!"

#: UDPSearchTabDialog.cpp:108 UDPSearchTabDialog.cpp:138 ParamSetDialog.h:381
msgid "PO_GSTR_SEND_TCP_DATA_ERROR"
msgstr "Send data to printer fail."

#: USBDevice.cpp:19
msgid "PO_GSTR_WRITE_USB_FAIL"
msgstr "Write usb printer fail"

#: USBDevice.cpp:25
msgid "PO_GSTR_WRITE_USB_LESS"
msgstr "Raw data send to usb printer is less than request"

#: USBDevice.cpp:145
msgid "PO_GSTR_OPEN_USB_FAIL"
msgstr "Open usb printer fail"

#: UserDefTabDialog.cpp:47 UserDefTabDialog.cpp:53
msgid "PO_GSTR_SET_DEFAULT_FAIL"
msgstr "Restore factory settings fail"

#: UserDefTabDialog.cpp:57
msgid "PO_GSTR_SET_DEFAULT_SUCCESS"
msgstr "Restore factory settings success"

#: WifiTabDialog.cpp:43
msgid "PO_GSTR_WIFI_SSID_EMPTY_ERR"
msgstr "SSID is empty,please input SSID"

#: WifiTabDialog.cpp:48
msgid "PO_GSTR_WIFI_SSID_EMPTY_LEN_ERR"
msgstr "The lenth of SSID is error"

#: WifiTabDialog.cpp:72
msgid "PO_GSTR_WIFI_PSKKEY_ERR"
msgstr "PSK key is empty,please input PSK key"

#: WifiTabDialog.cpp:77
msgid "PO_GSTR_WIFI_PSKKEY_LEN_ERR"
msgstr "The lenth of PSK key is error"

#: WifiTabDialog.cpp:105
msgid "PO_GSTR_WIFI_WEP_KEY_ERR"
msgstr "WEP key is empty,please input WEP key"

#: WifiTabDialog.cpp:110
msgid "PO_GSTR_WIFI_WEP_KEY_LEN_ERR"
msgstr "The lenth of WEP key is error"

#: BlueToothDialog.h:45
msgid "PO_IDC_STATIC_RPP_DEV_TYPE"
msgstr "Device Type:"

#: BlueToothDialog.h:46
msgid "PO_IDC_STATIC_RPP_DEV_NUM"
msgstr "Device Num:"

#: BlueToothDialog.h:47
msgid "PO_IDC_STATIC_RPP_DEV_NAME"
msgstr "Device Name:"

#: BlueToothDialog.h:48
msgid "PO_IDC_STATIC_RPP_PIN"
msgstr "Pin:"

#: BlueToothDialog.h:50 CodePageDialog.h:40 LabelSettingDialog.h:43
#: NetTabDialog.h:63 NetTabDialog.h:64 NetTabDialog.h:65 NetTabDialog.h:67
#: PrintSettingTabDialog.h:58 SerialTabDialog.h:48 SerialTabDialog.h:49
#: ShowPrinterInfoDlg.h:65 TestTabDialog.h:42 UDPSearchTabDialog.h:75
#: UserDefTabDialog.h:41 WifiTabDialog.h:56
msgid "PO_GSTR_SET"
msgstr "Set"

#: CodePageDialog.h:39
msgid "PO_IDC_STATIC_CODE_PAGE"
msgstr "Code Page:"

#: DownloadDialog.h:45
msgid "PO_DOWNLOAD_DLG_CAPTION"
msgstr "Download"

#: DownloadDialog.h:63
msgid "PO_DOWNLOAD_DLG_PROGRAM"
msgstr "Program"

#: DownloadDialog.h:70
msgid "PO_DOWNLOAD_DLG_LOGO"
msgstr "Logo"

#: EthernetDialog.h:43
msgid "PO_IDD_DIALOG_ETHERNET"
msgstr "Ethernet"

#: EthernetDialog.h:45
msgid "PO_GSTR_OK"
msgstr "OK"

#: EthernetDialog.h:46 ParamSetDialog.h:60 TextTestDialog.h:48
msgid "PO_GSTR_CANCEL"
msgstr "Exit"

#: LabelSettingDialog.h:41
msgid "PO_IDC_STATIC_LABEL_SERIAL_NUMBER"
msgstr "Serial Number:"

#: LabelSettingDialog.h:45
msgid "PO_IDC_BUTTON_LABEL_PRINT_LEN_SET_ZERO"
msgstr "Print Lenght Set Zero"

#: LocationTabDialog.h:39
msgid "PO_IDC_STATIC_LABEL_AUTO_LEARN"
msgstr "Label Auto Learn:"

#: LocationTabDialog.h:40 LocationTabDialog.h:42
msgid "PO_GSTR_LEARN"
msgstr "Learn"

#: LocationTabDialog.h:41
msgid "PO_IDC_STATIC_LACK_PAPER_LEARN"
msgstr "Lack Paper Learn:"

#: MainDlg.h:100
msgid "PO_GSTR_RONGTA_MAIN_DLG_CAPTION"
msgstr "RTLabelPrinterTool"

#: MainDlg.h:102
msgid "PO_GSTR_MAIN_DLG_CAPTION"
msgstr "LabelPrinterTool"

#: MainDlg.h:107
msgid "PO_IDC_STATIC_MAIN_GROUP"
msgstr "Communication with printer"

#: MainDlg.h:108
msgid "PO_IDC_STATIC_MAIN_GROUP2"
msgstr "List of Printers"

#: MainDlg.h:109
msgid "PO_IDC_BUTTON_ADD_PRINTER"
msgstr "Add Printer"

#: MainDlg.h:110
msgid "PO_IDC_BUTTON_MODIFY_PRINTER"
msgstr "Modify Printer"

#: MainDlg.h:111
msgid "PO_IDC_BUTTON_DEL_PRINTER"
msgstr "Delete Printer"

#: MainDlg.h:112
msgid "PO_IDC_BUTTON_CONNECT_TEST"
msgstr "Connection Test"

#: MainDlg.h:113
msgid "PO_IDC_BUTTON_SHOW_PRINTER_INFO"
msgstr "Show Printer Info"

#: MainDlg.h:114
msgid "PO_IDC_RADIO_SELECT_PORT"
msgstr "Port:"

#: MainDlg.h:115
msgid "PO_IDC_RADIO_SELECT_DRIVER"
msgstr "Printer Driver:"

#: MainDlg.h:116
msgid "PO_IDC_BUTTON_CONFIG_PORT"
msgstr "Config Port"

#: MainDlg.h:117
msgid "PO_IDC_BUTTON_SET"
msgstr "Set Printer"

#: MainDlg.h:118
msgid "PO_IDC_BUTTON_DOWNLOAD"
msgstr "Download"

#: MainDlg.h:255
msgid "PO_GSTR_PRINTER"
msgstr "Printer"

#: NetTabDialog.h:60
msgid "PO_IDC_STATIC_NET_PORT"
msgstr "Port:"

#: NetTabDialog.h:61
msgid "PO_IDC_STATIC_NET_DUPLEX_MODE"
msgstr "Duplex Mode:"

#: ParamSetDialog.h:57
msgid "PO_GSTR_PARAM_SET_DLG_CAPTION"
msgstr "Printer Info"

#: ParamSetDialog.h:59
msgid "PO_GSTR_PARAM_SET_OK"
msgstr "OK"

#: ParamSetDialog.h:370
msgid "PO_GSTR_INVALID_IP"
msgstr "Please enter a valid ip address"

#: PrintSettingTabDialog.h:44 ShowPrinterInfoDlg.h:53
msgid "PO_IDC_STATIC_PRINT_TYPE"
msgstr "Print Type:"

#: PrintSettingTabDialog.h:45 ShowPrinterInfoDlg.h:54
msgid "PO_IDC_STATIC_POWER_ON_POSITION"
msgstr "Automatic position when power on:"

#: PrintSettingTabDialog.h:46 ShowPrinterInfoDlg.h:55
msgid "PO_IDC_STATIC_LABEL_HEIGHT"
msgstr "Label Height:"

#: PrintSettingTabDialog.h:47 ShowPrinterInfoDlg.h:56
msgid "PO_IDC_STATIC_PAPER_TYPE"
msgstr "Paper Type:"

#: PrintSettingTabDialog.h:48 ShowPrinterInfoDlg.h:57
msgid "PO_IDC_STATIC_REPRINT_WHEN_ERROR"
msgstr "Reprint when error:"

#: PrintSettingTabDialog.h:49
msgid "PO_IDC_STATIC_AFTER_PRINTING"
msgstr "After printing"

#: PrintSettingTabDialog.h:50
msgid "PO_IDC_STATIC_N_MINUTES_LATER_OPEN"
msgstr "(0-255)minutes later open"

#: PrintSettingTabDialog.h:51 ShowPrinterInfoDlg.h:58
msgid "PO_IDC_STATIC_PREVENT_STICKER"
msgstr "Prevent Glue Paper:"

#: PrintSettingTabDialog.h:52 ShowPrinterInfoDlg.h:59
msgid "PO_IDC_STATIC_SPECIAL_LABEL"
msgstr "Special Label:"

#: PrintSettingTabDialog.h:53 ShowPrinterInfoDlg.h:60
msgid "PO_IDC_STATIC_PRINT_SPEED"
msgstr "Print Speed:"

#: PrintSettingTabDialog.h:54 ShowPrinterInfoDlg.h:61
msgid "PO_IDC_STATIC_DARKNESS_SETTING"
msgstr "Darkness Setting:"

#: PrintSettingTabDialog.h:55 ShowPrinterInfoDlg.h:62
msgid "PO_IDC_STATIC_H_ORIGIN"
msgstr "Horizontal Origin:"

#: PrintSettingTabDialog.h:56 ShowPrinterInfoDlg.h:63
msgid "PO_IDC_STATIC_VERTICAL_ORIGIN"
msgstr "Vertical Origin:"

#: PrintSettingTabDialog.h:57 ShowPrinterInfoDlg.h:64
msgid "PO_IDC_STATIC_PRINT_TO_STOP"
msgstr "Print To Stop:"

#: PrintSettingTabDialog.h:65 ShowPrinterInfoDlg.h:158
msgid "PO_GSTR_THERMAL"
msgstr "Thermal"

#: PrintSettingTabDialog.h:66 ShowPrinterInfoDlg.h:162
msgid "PO_GSTR_RIBBONS"
msgstr "Ribbons"

#: PrintSettingTabDialog.h:70 PrintSettingTabDialog.h:81
#: PrintSettingTabDialog.h:86 PrintSettingTabDialog.h:91
#: ShowPrinterInfoDlg.h:167 ShowPrinterInfoDlg.h:192 ShowPrinterInfoDlg.h:201
#: ShowPrinterInfoDlg.h:210 TestTabDialog.h:57 UserDefTabDialog.h:48
msgid "PO_GSTR_DISABLE"
msgstr "Disable"

#: PrintSettingTabDialog.h:71 PrintSettingTabDialog.h:82
#: PrintSettingTabDialog.h:87 PrintSettingTabDialog.h:92
#: ShowPrinterInfoDlg.h:171 ShowPrinterInfoDlg.h:196 ShowPrinterInfoDlg.h:205
#: ShowPrinterInfoDlg.h:214 TestTabDialog.h:58 UserDefTabDialog.h:49
msgid "PO_GSTR_ENABLE"
msgstr "Enable"

#: PrintSettingTabDialog.h:75 ShowPrinterInfoDlg.h:179
msgid "PO_GSTR_RECEIPT"
msgstr "Receipt"

#: PrintSettingTabDialog.h:76 ShowPrinterInfoDlg.h:183
msgid "PO_GSTR_LABEL"
msgstr "Label"

#: PrintSettingTabDialog.h:77 ShowPrinterInfoDlg.h:187
msgid "PO_GSTR_BLACK_MARK"
msgstr "Black Mark"

#: PrinterSetDialog.h:50
msgid "PO_PRINTER_SET_DLG_CAPTION"
msgstr "Set Printer"

#: PrinterSetDialog.h:70
msgid "PO_PRINTER_SET_DLG_PRINT_SETTING"
msgstr "Printer Parameter Setting"

#: PrinterSetDialog.h:73
msgid "PO_PRINTER_SET_DLG_LOCATION"
msgstr "Location"

#: PrinterSetDialog.h:76
msgid "PO_PRINTER_SET_DLG_TEST"
msgstr "Test"

#: PrinterSetDialog.h:79
msgid "PO_PRINTER_SET_DLG_USER_DEF"
msgstr "User Def"

#: PrinterSetDialog.h:83
msgid "PO_PRINTER_SET_DLG_EHTERNET"
msgstr "Ethernet"

#: PrinterSetDialog.h:87
msgid "PO_PRINTER_SET_DLG_SERIAL"
msgstr "Serial"

#: PrinterSetDialog.h:90
msgid "PO_PRINTER_SET_DLG_WIFI"
msgstr "Wifi"

#: PrinterSetDialog.h:93
msgid "PO_GSTR_RPP_BLUETOOTH_NOTICE"
msgstr "Bluetooth setting"

#: PrinterSetDialog.h:96
msgid "PO_PRINTER_SET_DLG_CODEPAGE"
msgstr "CodePage"

#: ProgramTabDialog.h:48
msgid "PO_IDC_STATIC_PROGRAM_SELECT"
msgstr "Select A Printer Firmware:"

#: ProgramTabDialog.h:50
msgid "PO_IDC_BUTTON_PROGRAM_OPEN"
msgstr "Select Firmware"

#: ProgramTabDialog.h:51
msgid "PO_IDC_BUTTON_PROGRAM_UPDATE"
msgstr "Update"

#: SerialTabDialog.h:42
msgid "PO_IDC_STATIC_SERIAL_BAUDRATE"
msgstr "Baud rate:"

#: SerialTabDialog.h:43
msgid "PO_IDC_STATIC_SERIAL_NUMBER_BITS"
msgstr "Number of data bits:"

#: SerialTabDialog.h:44
msgid "PO_GSTR_STOP_BITS"
msgstr "Stop bits:"

#: SerialTabDialog.h:45
msgid "PO_IDC_STATIC_SERIAL_HAND_SHAKE"
msgstr "Hand shake:"

#: SerialTabDialog.h:46
msgid "PO_GSTR_PARITY"
msgstr "Parity:"

#: ShowPrinterInfoDlg.h:39
msgid "PO_DLG_SHOW_PRINTER_INFOMATION"
msgstr "Printer Infomation"

#: ShowPrinterInfoDlg.h:41
msgid "PO_IDC_STATIC_PRINTER_TYPE"
msgstr "Priter Type:"

#: ShowPrinterInfoDlg.h:42
msgid "PO_IDC_STATIC_PRINTER_SERIAL_NUMBER"
msgstr "Printer Serial Number:"

#: ShowPrinterInfoDlg.h:43
msgid "PO_IDC_STATIC_PRINTER_FIRMWARE_VERSION"
msgstr "Firmware Version:"

#: ShowPrinterInfoDlg.h:44
msgid "PO_IDC_STATIC_PRINTER_PRINT_LENGTH"
msgstr "Printer Print Length:"

#: ShowPrinterInfoDlg.h:45
msgid "PO_IDC_STATIC_PRINTER_STATUS"
msgstr "Printer Status:"

#: ShowPrinterInfoDlg.h:114
msgid "PO_LABEL_PRINT_STATUS_PRINT_PAUSE"
msgstr "Print Pause"

#: ShowPrinterInfoDlg.h:118
msgid "PO_LABEL_PRINT_STATUS_STUCK_PAPER"
msgstr "Stuck Paper"

#: ShowPrinterInfoDlg.h:122
msgid "PO_LABEL_PRINT_STATUS_VOLTAGE_ERR"
msgstr "Voltage is too high or too low"

#: ShowPrinterInfoDlg.h:126
msgid "PO_LABEL_PRINT_STATUS_LACK_PAPER"
msgstr "Lack of paper"

#: ShowPrinterInfoDlg.h:130
msgid "PO_LABEL_PRINT_STATUS_SWITCH_NOT_PLACE"
msgstr "Position switch is not in place"

#: ShowPrinterInfoDlg.h:134
msgid "PO_LABEL_PRINT_STATUS_OVER_HEART"
msgstr "Over heart"

#: ShowPrinterInfoDlg.h:138
msgid "PO_LABEL_PRINT_STATUS_RAM_TEST_FAIL"
msgstr "ARM test fail"

#: ShowPrinterInfoDlg.h:142
msgid "PO_LABEL_PRINT_STATUS_READY"
msgstr "Ready"

#: ShowPrinterInfoDlg.h:246
msgid "PO_GSTR_GET_PRINTER_INFO_ERR"
msgstr "Getting Printer's Information fail"

#: TestTabDialog.h:41
msgid "PO_IDC_STATIC_DUMP_MODE"
msgstr "Dump Mode:"

#: TestTabDialog.h:44
msgid "PO_IDC_STATIC_BAD_POINT_CHECK"
msgstr "Bad Point Check:"

#: TestTabDialog.h:47 UDPSearchTabDialog.h:77
msgid "PO_GSTR_SELF_TEST"
msgstr "Self Test"

#: TestTabDialog.h:48
msgid "PO_IDC_BUTTON_PRINT_TEXT_TEST"
msgstr "Print Text Test"

#: TestTabDialog.h:50
msgid "PO_IDC_BUTTON_BAD_POINT_CHECK"
msgstr "Check"

#: TextTestDialog.h:41
msgid "PO_GSTR_TEXT_TEST_DLG_CAPTION"
msgstr "Print Text Test"

#: TextTestDialog.h:43
msgid "PO_IDC_STATIC_PRINT_TEXT_TEST_ENTER"
msgstr "Please enter text you need print:"

#: TextTestDialog.h:44
msgid "PO_IDC_STATIC_SET_AREA_PRINT"
msgstr "Setting the print area use label"

#: TextTestDialog.h:45
msgid "PO_IDC_STATIC_PRINTABLE_WIDTH"
msgstr "Printable Width:"

#: TextTestDialog.h:46
msgid "PO_IDC_STATIC_PRINTABLE_HEIGHT"
msgstr "Printable Height:"

#: TextTestDialog.h:47
msgid "PO_GSTR_PRINT"
msgstr "Print"

#: UDPSearchTabDialog.h:76
msgid "PO_IDC_BUTTON_UDP_STATUS"
msgstr "Status"

#: UDPSearchTabDialog.h:78
msgid "PO_GSTR_REBOOT"
msgstr "Reboot Printer"

#: UDPSearchTabDialog.h:79
msgid "PO_GSTR_SEARCH"
msgstr "Search Printers"

#: UDPSearchTabDialog.h:81
msgid "PO_IDC_STATIC_UDP_NOTICE"
msgstr ""
"Notice: After searched printers, please select the printer before other "
"operation."

#: UDPSearchTabDialog.h:108
msgid "PO_IDC_STATIC_UDP_LOCAL_IP"
msgstr "Local IP Address: "

#: UserDefTabDialog.h:39
msgid "PO_IDC_STATIC_USER_BEEP"
msgstr "Beep:"

#: UserDefTabDialog.h:40
msgid "PO_IDC_BUTTON_USER_DEF_SET_DEFAULT"
msgstr "Restore factory settings"

#: WifiTabDialog.h:47
msgid "PO_IDC_STATIC_WIFI_MODE"
msgstr "Mode:"

#: WifiTabDialog.h:48 WifiTabDialog.h:51
msgid "PO_GSTR_TYPE"
msgstr "Type:"

#: WifiTabDialog.h:49
msgid "PO_IDC_STATIC_WIFI_WPA_ENCRY"
msgstr "Encryption:"

#: WifiTabDialog.h:50
msgid "PO_IDC_STATIC_WIFI_WPA_KEY"
msgstr "PSK Key:"

#: WifiTabDialog.h:52
msgid "PO_IDC_STATIC_WIFI_WEP_KEY"
msgstr "Key:"

#: WifiTabDialog.h:54
msgid "PO_IDC_RADIO_WIFI_NONE"
msgstr "OPEN(No Keys)"

#~ msgid "PO_GSTR_NET_INPUT_VALID_PORT"
#~ msgstr "Please enter a valid port"

#~ msgid "PO_KM_PRINT_STATUS_PRINT_PAUSE"
#~ msgstr "Print Pause"

#~ msgid "PO_KM_PRINT_STATUS_STUCK_PAPER"
#~ msgstr "Stuck Paper"

#~ msgid "PO_KM_PRINT_STATUS_VOLTAGE_ERR"
#~ msgstr "Voltage is too high or too low"

#~ msgid "PO_KM_PRINT_STATUS_LACK_PAPER"
#~ msgstr "Lack of paper"

#~ msgid "PO_KM_PRINT_STATUS_SWITCH_NOT_PLACE"
#~ msgstr "Position switch is not in place"

#~ msgid "PO_KM_PRINT_STATUS_OVER_HEART"
#~ msgstr "Over heart"

#~ msgid "PO_KM_PRINT_STATUS_RAM_TEST_FAIL"
#~ msgstr "ARM test fail"

#~ msgid "PO_KM_PRINT_STATUS_READY"
#~ msgstr "Ready"

#~ msgid "PO_GSTR_BM_NUMBER_ERR"
#~ msgstr "Please input a number"

#~ msgid "PO_GSTR_HOTTIME_NUMBER_ERR"
#~ msgstr "You input must be bigger than 300"

#~ msgid "PO_GSTR_HOTTIME_NUMBER_OVER_ERR"
#~ msgstr "You input must be less than 800"

#~ msgid "PO_GSTR_LOGO_LIST_MAX"
#~ msgstr "Can't add log list any more"

#~ msgid "PO_GSTR_SELECT_LOGO_ERR"
#~ msgstr "Please select a logo!"

#~ msgid "PO_GSTR_DOWNLOAD_LOGO_ERR"
#~ msgstr "Download logo fail"

#~ msgid "PO_GSTR_RPP_MODEL_NAME_EMPTY_ERR"
#~ msgstr "Please input model name"

#~ msgid "PO_GSTR_RPP_SERIAL_EMPTY_ERR"
#~ msgstr "Please input serial"

#~ msgid "PO_IDC_STATIC_2DBAR_TYPE"
#~ msgstr "Set Type:"

#~ msgid "PO_GSTR_CODE_PAGE"
#~ msgstr "Code Page:"

#~ msgid "PO_GSTR_BAUD_RATE"
#~ msgstr "Baud Rate:"

#~ msgid "PO_GSTR_CHARACTER"
#~ msgstr "Character:"

#~ msgid "PO_GSTR_CHS"
#~ msgstr "CHS/Line:"

#~ msgid "PO_GSTR_DENSITY"
#~ msgstr "Density:"

#~ msgid "PO_IDC_CHECK_BASE_BUZZER"
#~ msgstr "Buzzer"

#~ msgid "PO_IDC_CHECK_BASE_CUTTER"
#~ msgstr "Cutter"

#~ msgid "PO_IDC_CHECK_BASE_DRAWER"
#~ msgstr "Drawer"

#~ msgid "PO_IDC_CHECK_BASE_BUZZER_AFTER_PRINT"
#~ msgstr "Buzzer After Print"

#~ msgid "PO_IDC_CHECK_BASE_AUTO_REPRINT"
#~ msgstr "Auto Reprint The Last Receipt"

#~ msgid "PO_IDC_STATIC_BIG5_E"
#~ msgstr "Emualtion Mode:"

#~ msgid "PO_IDC_STATIC_BIG5_LANGUAGE"
#~ msgstr "Language:"

#~ msgid "PO_IDC_STATIC_BIG5_SPEED"
#~ msgstr "Speed:"

#~ msgid "PO_IDC_STATIC_BIG5_BARDCODE_WIDE"
#~ msgstr "Barcode Wide:"

#~ msgid "PO_IDC_STATIC_BIG5_PAPER_WIDTH"
#~ msgstr "Paper Width:"

#~ msgid "PO_IDC_STATIC_BIG5_AUTO_REPRINT"
#~ msgstr "Auto Reprint Mode:"

#~ msgid "PO_IDC_STATIC_BM_LENGHT"
#~ msgstr "Black Mark Length:"

#~ msgid "PO_IDC_STATIC_BM_WIDTH"
#~ msgstr "Black Mark Width:"

#~ msgid "PO_IDC_STATIC_BM_PRINT"
#~ msgstr "Print After Black Mark:"

#~ msgid "PO_IDC_STATIC_BM_CUT"
#~ msgstr "Cut After Black Mark:"

#~ msgid "PO_IDC_BUTTON_BLACK_NEXT_MARK"
#~ msgstr "Next Black Mark"

#~ msgid "PO_IDC_BUTTON_BLACK_NEXT_CUT"
#~ msgstr "Next Cut"

#~ msgid "PO_IDC_STATIC_HEART_TIME"
#~ msgstr "Heat Time:"

#~ msgid "PO_GSTR_ADD"
#~ msgstr "Add"

#~ msgid "PO_GSTR_DELETE"
#~ msgstr "Delete"

#~ msgid "PO_GSTR_DOWNLOAD"
#~ msgstr "Download"

#~ msgid "PO_IDC_STATIC_QUEUE_NUMBER"
#~ msgstr "Sequence Number:"

#~ msgid "PO_IDC_STATIC_DATE_AND_TIME"
#~ msgstr "Date and Time:"

#~ msgid "PO_IDC_STATIC_OTHER_MODE"
#~ msgstr "Mode:"

#~ msgid "PO_GSTR_76MM_MODE"
#~ msgstr "76mm paper mode"

#~ msgid "PO_GSTR_58MM_MODE"
#~ msgstr "58mm paper mode"

#~ msgid "PO_IDC_STATIC_RPP_FONT"
#~ msgstr "Font:"

#~ msgid "PO_IDC_STATIC_RPP_IDLE_TIME"
#~ msgstr "Idle Time:"

#~ msgid "PO_IDC_STATIC_RPP_MAX_FEED"
#~ msgstr "Max Feed:"

#~ msgid "PO_IDC_STATIC_RPP_PAGE_LEN"
#~ msgstr "Page Len:"

#~ msgid "PO_IDC_STATIC_RPP_OFF_TIME"
#~ msgstr "Off Time:"

#~ msgid "PO_PRINTER_SET_LABEL_SETTING_TAB"
#~ msgstr "Label Setting"

#~ msgid "PO_PRINTER_SET_DLG_BASE"
#~ msgstr "Base"

#~ msgid "PO_PRINTER_SET_DLG_BM"
#~ msgstr "BlackMark"

#~ msgid "PO_PRINTER_SET_DLG_RPP"
#~ msgstr "RPP"

#~ msgid "PO_PRINTER_SET_DLG_HEART_TIME"
#~ msgstr "Heart Time"

#~ msgid "PO_PRINTER_SET_DLG_2D_BAR"
#~ msgstr "2D Barcode"

#~ msgid "PO_PRINTER_SET_DLG_SERIAL_PRINTER"
#~ msgstr "Search Printer"

#~ msgid "PO_PRINTER_SET_DLG_BIG5"
#~ msgstr "BIG5"

#~ msgid "PO_PRINTER_SET_DLG_OTHER"
#~ msgstr "Other"

#~ msgid "PO_IDC_STATIC_RPP_MODEL_NAME"
#~ msgstr "Model Name:"

#~ msgid "PO_IDC_STATIC_SERIAL_DHCP"
#~ msgstr "DHCP:"

#~ msgid "PO_IDC_STATIC_SERIAL_512_DOTS"
#~ msgstr "512 Dots:"

#~ msgid "PO_GSTR_PRINTER_NOT_SELECT"
#~ msgstr "Please select a existent printer!"

#~ msgid "PO_GSTR_DLG_CAPTION"
#~ msgstr "Ethernet Printer Config Tool"

#~ msgid "PO_GSTR_STATIC_NOTICE"
#~ msgstr ""
#~ "Notice: After searched printers, please select the printer before other "
#~ "operation."

#~ msgid "PO_GSTR_STATIC_IP"
#~ msgstr "Local IP Address: "

#~ msgid "PO_GSTR_PRAAM_SET"
#~ msgstr "Printer Parameter Settings"

#~ msgid "PO_GSTR_PRINTER_STATUS"
#~ msgstr "Printer Status"

#~ msgid "PO_GSTR_SELFTEST"
#~ msgstr "Printer Self Test Page"

#~ msgid "PO_GSTR_DUPLEX_AUTO"
#~ msgstr "Auto Detect"

#~ msgid "PO_GSTR_10M_HALF"
#~ msgstr "10Mbps Half Duplex"

#~ msgid "PO_GSTR_100M_HALF"
#~ msgstr "100Mbps Half Duplex"

#~ msgid "PO_GSTR_10M_FULL"
#~ msgstr "10Mbps Full Duplex"

#~ msgid "PO_GSTR_100M_FULL"
#~ msgstr "100Mbps Full Duplex"

#~ msgid "PO_GSTR_INSTALL_DRIVER_ERROR"
#~ msgstr "Driver install fail"

#~ msgid "PO_GSTR_ADD_PRINTER_ERROR"
#~ msgstr "Printer add fail"

#~ msgid "PO_GSTR_INSTALL_SUCCESS"
#~ msgstr "Install Success"

#~ msgid "PO_GSTR_OPEN_COM_ERROR"
#~ msgstr "Cann't open com"

#~ msgid "PO_GSTR_OPEN_LPT_ERROR"
#~ msgstr "Open LPT port fail"

#~ msgid "PO_GSTR_GET_LPT_CONFIG_ERROR"
#~ msgstr "Get LPT configure fail"

#~ msgid "PO_GSTR_DRIVER_PORT_ERROR"
#~ msgstr "Please select port for printer"

#~ msgid "PO_GSTR_DRIVER_NAME_ERROR"
#~ msgstr "Please input printer name"

#~ msgid "PO_GSTR_OS_TYPE"
#~ msgstr "OS Type:"

#~ msgid "PO_GSTR_PRINTER_TYPE"
#~ msgstr "Printer Type"

#~ msgid "PO_GSTR_POS"
#~ msgstr "POS Printer"

#~ msgid "PO_GSTR_LAPTOP"
#~ msgstr "Laptop Printer"

#~ msgid "PO_GSTR_MICRO_PRINTER"
#~ msgstr "Micro Printer"

#~ msgid "PO_GSTR_PIN_PRINTER"
#~ msgstr "Pin Printer"

#~ msgid "PO_GSTR_PRINTER_DETAIL"
#~ msgstr "Printer Type"

#~ msgid "PO_GSTR_PRINTER_PORT"
#~ msgstr "Printer Port"

#~ msgid "PO_GSTR_PT_CONFIG_NAME"
#~ msgstr "Printer Name:"

#~ msgid "PO_GSTR_PT_CONFIG_PORT"
#~ msgstr "Config Port"

#~ msgid "PO_GSTR_PORT_STATIC"
#~ msgstr "Port:"
